ITNE3008 Switching

ITNE3008 Switching

ITNE3008 Switching

INTRODUCTION

There are plenty of resources available in marge regarding network simulation and lab works. The one most famous and popular software that simulate the network with very details is Cisco packet traces. It allows the user to connect different devices in the simulation and the user can configure both by user interface and command line interface. The command line interface could be used to provide instruction to different devices and hence work. The user can play around with wide spectrum of architecture.

ACTIVITY 2.1 and 2.2

The host names are assigned as switch A to switch D

COMMANDS SWITCH A

C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)

Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.

2960-24TT starting…

Base ethernet MAC Address: 00E0.8F92.9D4A

Xmodem file system is available.

Initializing Flash…

flashfs[0]: 2 files, 0 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 64016384

flashfs[0]: Bytes used: 4416001

flashfs[0]: Bytes available: 59600383

flashfs[0]: flashfs fsck took 1 seconds.

…done Initializing Flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

 

Loading “flash:/c2960-lanbase-mz.122-25.FX.bin”…

######################### [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software – Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Wed 12-Oct-05 22:05 by pt_team

Image text-base: 0x80008098, data-base: 0x814129C4

Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.

24 FastEthernet/IEEE 802.3 interface(s)

2 Gigabit Ethernet/IEEE 802.3 interface(s)

63488K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00E0.8F92.9D4A

Motherboard assembly number : 73-9832-06

Power supply part number : 341-0097-02

Motherboard serial number : FOC103248MJ

Power supply serial number : DCA102133JA

Model revision number : B0

Motherboard revision number : C0

Model number : WS-C2960-24TT

System serial number : FOC1033Z1EY

Top Assembly Part Number : 800-26671-02

Top Assembly Revision Number : B0

Version ID : V02

CLEI Code Number : COM3K00BRA

Hardware Board Revision Number : 0x01

 

Switch Ports Model SW Version SW Image

—— —– —– ———- ———-

* 1 26 WS-C2960-24TT 12.2 C2960-LANBASE-M

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Wed 12-Oct-05 22:05 by pt_team

 

Press RETURN to get started!

 

%LINK-5-CHANGED: Interface FastEthernet0/7, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/7, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/8, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/9, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/9, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/10, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/11, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/12, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/12, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/6, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed state to up

37859>enable

37859#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

37859(config)#hostname 39605

39605(config)#

39605(config)#interface FastEthernet0/7

39605(config-if)#

39605(config-if)#exit

39605(config)#interface FastEthernet0/8

39605(config-if)#

39605(config-if)#exit

39605(config)#interface FastEthernet0/9

39605(config-if)#

39605(config-if)#exit

39605(config)#interface FastEthernet0/10

39605(config-if)#

39605(config-if)#exit

39605(config)#interface FastEthernet0/11

39605(config-if)#

39605(config-if)#exit

39605(config)#interface FastEthernet0/12

39605(config-if)#

39605(config-if)#exit

39605(config)#interface FastEthernet0/13

39605(config-if)#

39605#

%SYS-5-CONFIG_I: Configured from console by console

Switching

Routing Switching

SwitchC

FOR SWITCH D

C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWARE (fc4)

cisco WS-C3560-24PS (PowerPC405) processor (revision P0) with 122880K/8184K bytes of memory.

3560-24PS starting…

Base ethernet MAC Address: 00D0.D3D0.44D1

Xmodem file system is available.

Initializing Flash…

flashfs[0]: 3 files, 0 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 64016384

flashfs[0]: Bytes used: 8918011

flashfs[0]: Bytes available: 55098373

flashfs[0]: flashfs fsck took 1 seconds.

…done Initializing Flash.

 

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

 

Loading “flash:/c3560-advipservicesk9-mz.122-37.SE1.bin”…

######################### [OK]

Restricted Rights Legend

 

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software – Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

 

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

 

Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(37)SE1, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 05-Jul-07 22:22 by pt_team

Image text-base: 0x00003000, data-base: 0x01500000

POST: CPU MIC register Tests : Begin

POST: CPU MIC register Tests : End, Status Passed

 

POST: PortASIC Memory Tests : Begin

POST: PortASIC Memory Tests : End, Status Passed

 

POST: CPU MIC interface Loopback Tests : Begin

POST: CPU MIC interface Loopback Tests : End, Status Passed

 

POST: PortASIC RingLoopback Tests : Begin

POST: PortASIC RingLoopback Tests : End, Status Passed

 

POST: Inline Power Controller Tests : Begin

POST: Inline Power Controller Tests : End, Status Passed

 

POST: PortASIC CAM Subsystem Tests : Begin

POST: PortASIC CAM Subsystem Tests : End, Status Passed

 

POST: PortASIC Port Loopback Tests : Begin

POST: PortASIC Port Loopback Tests : End, Status Passed

 

Waiting for Port download…Complete

 

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C3560-24PS (PowerPC405) processor (revision P0) with 122880K/8184K bytes of memory.

Processor board ID CAT1037RJF7

24 FastEthernet/IEEE 802.3 interface(s)

2 Gigabit Ethernet/IEEE 802.3 interface(s)

 

63488K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00D0.D3D0.44D1

Motherboard assembly number : 73-9673-09

Power supply part number : 341-0029-05

Motherboard serial number : CAT103758VY

Power supply serial number : DTH1036C7UB

Model revision number : P0

Motherboard revision number : A0

Model number : WS-C3560-24PS-E

System serial number : CAT1037RJF7

Top Assembly Part Number : 800-26380-04

Top Assembly Revision Number : B0

Version ID : V06

CLEI Code Number : COM1100ARC

Hardware Board Revision Number : 0x01

 

Switch Ports Model SW Version SW Image

—— —– —– ———- ———-

* 1 26 WS-C3560-24PS 12.2(37)SE1 C3560-ADVIPSERVICESK

 

Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(37)SE1, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 05-Jul-07 22:22 by pt_team

 

Press RETURN to get started!

 

%LINK-5-CHANGED: Interface FastEthernet0/7, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/7, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/8, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/9, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/9, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/10, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/11, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/12, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/12, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/6, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/7, changed state to down

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/7, changed state to up

%SPANTREE-2-RECV_PVID_ERR: Received 802.1Q BPDU on non trunk FastEthernet0/8 VLAN1.

 

%SPANTREE-2-BLOCK_PVID_LOCAL: Blocking FastEthernet0/8 on VLAN0001. Inconsistent port type.

 

%SPANTREE-2-RECV_PVID_ERR: Received 802.1Q BPDU on non trunk FastEthernet0/9 VLAN1.

 

%SPANTREE-2-BLOCK_PVID_LOCAL: Blocking FastEthernet0/9 on VLAN0001. Inconsistent port type.

%SPANTREE-2-RECV_PVID_ERR: Received 802.1Q BPDU on non trunk FastEthernet0/10 VLAN1.

 

%SPANTREE-2-BLOCK_PVID_LOCAL: Blocking FastEthernet0/10 on VLAN0001. Inconsistent port type.

 

%SPANTREE-2-RECV_PVID_ERR: Received 802.1Q BPDU on non trunk FastEthernet0/11 VLAN1.

 

%SPANTREE-2-BLOCK_PVID_LOCAL: Blocking FastEthernet0/11 on VLAN0001. Inconsistent port type.

 

%SPANTREE-2-RECV_PVID_ERR: Received 802.1Q BPDU on non trunk FastEthernet0/12 VLAN1.

 

%SPANTREE-2-BLOCK_PVID_LOCAL: Blocking FastEthernet0/12 on VLAN0001. Inconsistent port type.

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to down

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/12, changed state to down

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/12, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/9, changed state to down

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/9, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to down

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to down

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to up

37859>enable

37859#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

37859(config)#hostname 39605

39605(config)#exit

39605#

%SYS-5-CONFIG_I: Configured from console by console

 

39605#

39605#

ACTIVITY 3

It shows the VLAN status.

SwtichA.png

SwtichC.png

 

SwitchD

 

SwitchB

 

ACTIVITY 4.1 and .2

COMMAND

 

C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)

Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.

2960-24TT starting…

Base ethernet MAC Address: 00E0.8F92.9D4A

Xmodem file system is available.

Initializing Flash…

flashfs[0]: 2 files, 0 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 64016384

flashfs[0]: Bytes used: 4416001

flashfs[0]: Bytes available: 59600383

flashfs[0]: flashfs fsck took 1 seconds.

…done Initializing Flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

 

Loading “flash:/c2960-lanbase-mz.122-25.FX.bin”…

######################### [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software – Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Wed 12-Oct-05 22:05 by pt_team

Image text-base: 0x80008098, data-base: 0x814129C4

 

Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.

24 FastEthernet/IEEE 802.3 interface(s)

2 Gigabit Ethernet/IEEE 802.3 interface(s)

63488K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00E0.8F92.9D4A

Motherboard assembly number : 73-9832-06

Power supply part number : 341-0097-02

Motherboard serial number : FOC103248MJ

Power supply serial number : DCA102133JA

Model revision number : B0

Motherboard revision number : C0

Model number : WS-C2960-24TT

System serial number : FOC1033Z1EY

Top Assembly Part Number : 800-26671-02

Top Assembly Revision Number : B0

Version ID : V02

CLEI Code Number : COM3K00BRA

Hardware Board Revision Number : 0x01

 

Switch Ports Model SW Version SW Image

—— —– —– ———- ———-

* 1 26 WS-C2960-24TT 12.2 C2960-LANBASE-M

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Wed 12-Oct-05 22:05 by pt_team

 

Press RETURN to get started!

%LINK-5-CHANGED: Interface FastEthernet0/7, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/7, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/8, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/9, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/9, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/10, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/11, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/12, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/12, changed state to up

 

%LINK-5-CHANGED: Interface FastEthernet0/6, changed state to up

 

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed state to up

SwitchA>enable

SwitchA#

SwitchA#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

SwitchA(config)#interface FastEthernet0/1

SwitchA(config-if)#

SwitchA(config-if)#exit

SwitchA(config)#interface FastEthernet0/2

SwitchA(config-if)#

SwitchA(config-if)#exit

SwitchA(config)#interface FastEthernet0/3

SwitchA(config-if)#

SwitchA(config-if)#exit

SwitchA(config)#interface FastEthernet0/7

SwitchA(config-if)#

SwitchA(config-if)#exit

SwitchA(config)#interface FastEthernet0/7

SwitchA(config-if)#

SwitchA

 

 

 

switchB

 

 

STAY UPDATED WITH ESSAY WRITING ASSIGNMENT

java assignment help
Call Back